|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
200W Single Output DC-DC Converter Features : 2:1 wide input range SD-200 series Protections: Short circuit / Overload / Over voltage / Over temperature 1500VDC I/O isolation Cooling by free air convection 100% full load burn-in test 24V and 48V input voltage design refer to LVD 2 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME VOLTAGE RANGE INPUT EFFICIENCY (Typ.) DC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMI CONDUCTION & RADIATION EMS IMMUNITY MTBF OTHERS NOTE (for SD-200C-24 type only) SD-200B 5V 34A 0 ~ 34A 170W 4.5 ~ 5.5VDC 2.0% 0.5% 1.0% B:19 ~ 36VDC 79% 12V 16.7A 0 ~ 16.7A 200.4W 120mVp-p 11 ~ 16VDC 1.0% 0.5% 1.0% 24V 8.4A 0 ~ 8.4A 201.6W 150mVp-p 23 ~ 30VDC 1.0% 0.5% 1.0% 48V 4.2A 0 ~ 4.2A 201.6W 200mVp-p 43 ~ 53VDC 1.0% 0.5% 1.0% D:72 ~144VDC 86% 10.4A/24V 81% 5.4A/48V 84% 5.2A/48V SD-200C 5V 40A 0 ~ 40A 200W 100mVp-p 4.5 ~ 5.5VDC 2.0% 0.5% 1.0% 12V 16.7A 0 ~ 16.7A 200.4W 120mVp-p 11 ~ 16VDC 1.0% 0.5% 1.0% (for D type only) 24V 8.4A 0 ~ 8.4A 201.6W 150mVp-p 23 ~ 30VDC 1.0% 0.5% 1.0% 48V 4.2A 0 ~ 4.2A 201.6W 200mVp-p 43 ~ 53VDC 1.0% 0.5% 1.0% RIPPLE & NOISE (max.) Note.2 100mVp-p 300ms, 50ms at full load C:36 ~ 72VDC 82% 85% 86% 6.7A/48V 86% 5A/48V 10.8A/24V 10.6A/24V 10.4A/24V C:45A/48VDC D:45A/96VDC 105 ~ 135% rated output power Protection type : Shut down o/p voltage, re-power on to recover 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (100 5 5.75 ~ 6.75V 16.8 ~ 20V 31.5 ~ 37.5V 53 ~ 65V for SD-200B-12 only) TSW1 detect on main power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1approved (for SD-200C-24 type only), IEC60950-1 CB approved by TUV (for D type only) I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-4-2,3,4,6,8; ENV50204, light industry level, criteria A 218.2K hrs min. MIL-HDBK-217F (25 215*115*50mm (L*W*H) 1.1Kg; 12pcs/14.4Kg/0.92CUFT ) DIMENSION PACKING 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:SD-200-SPEC 2008-03-24 200W Single Output DC-DC Converter Features : 2:1 wide input range SD-200 series Protections: Short circuit / Overload / Over voltage / Over temperature 1500VDC I/O isolation Cooling by free air convection 100% full load burn-in test 24V and 48V input voltage design refer to LVD 2 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME VOLTAGE RANGE INPUT EFFICIENCY (Typ.) DC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) (for D type only) SD-200D 5V 40A 0 ~ 40A 200W 4.5 ~ 5.5VDC 2.0% 0.5% 1.0% 300ms, 50ms at full load B:19 ~ 36VDC 82% 3.5A/96V C:45A/48VDC C:36 ~ 72VDC 82% 3.5A/96V D:45A/96VDC D:72 ~144VDC 84% 3.5A/96V 90% 3.5A/96V 12V 16.7A 0 ~ 16.7A 200.4W 120mVp-p 11 ~ 16VDC 1.0% 0.5% 1.0% 24V 8.4A 0 ~ 8.4A 201.6W 150mVp-p 23 ~ 30VDC 1.0% 0.5% 1.0% 48V 4.2A 0 ~ 4.2A 201.6W 200mVp-p 43 ~ 53VDC 1.0% 0.5% 1.0% RIPPLE & NOISE (max.) Note.2 100mVp-p 105 ~ 135% rated output power Protection type : Shut down o/p voltage, re-power on to recover 5.75 ~ 6.75V 16.8 ~ 20V Protection type : Shut down o/p voltage, re-power on to recover 85 5 (TSW1) detect on main power transistor 31.5 ~ 37.5V 53 ~ 65V Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes IEC60950-1 CB approved by TUV (for D type only) I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-4-2,3,4,6,8; ENV50204, light industry level, criteria A 218.2K hrs min. MIL-HDBK-217F (25 215*115*50mm (L*W*H) 1.1Kg; 12pcs/14.4Kg/0.92CUFT ) EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE 1. All parameters NOT specially mentioned are measured at 24,48,96VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:SD-200-SPEC 2008-03-24 200W Single Output DC-DC Converter Mechanical Specification 117.5 32.5 27.5 150 177.5 SD-200 Case No. 912B series Unit:mm LED +V ADJ. 9 8 7 6 5 4 3 2 1 9.5 4-M4 L=5mm 8.3 215 32.5 13 max. 150 10 32.5 5-M3 L=3mm 50.5 115 85 50 Terminal Pin No. Assignment : Pin No. 1 2 3 Assignment DC INPUT V+ DC INPUT VFG Assignment Pin No. 4,5,6 DC OUTPUT V7,8,9 DC OUTPUT V+ 25 50 C L 4-M4 L=6mm Block Diagram I/P EMI FILTER RECTIFIERS & FILTER FILTER POWER SWITCHING RECTIFIERS & FILTER fosc : 100KHz +V -V FG O.V.P. O.L.P. O.T.P. PWM CONTROL DETECTION CIRCUIT Derating Curve Static Characteristics Ta=25 100 others 100 90 80 80 60 LOAD (%) LOAD (%) 40 SD-200B,C,D-5 SD-200B-12 SD-200B-24 SD-200B-48 70 60 50 40 20 -20 0 10 20 30 40 50 60 (HORIZONTAL) B:19 C:36 D:72 24 48 96 36 72 144 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) File Name:SD-200-SPEC 2008-03-24 |
Price & Availability of SD-200 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |